What impact will the marine heat exchanger have on us

The scale plug for a long time will cause the deterioration of the heat exchange working conditions. The heat transfer surface of the heat exchanger exceeds the rated temperature or local overheating, which may cause cracks and burst tubes of the heat exchanger, causing accidents. The increased energy consumption does not achieve the effect of energy saving. The accumulation of dirt threatens the safe operation of the heat exchanger and shortens the service life of the heat exchanger, making the heat exchanger face equipment downtime and maintenance. In serious cases, it is necessary to scrap the original heat exchanger and replace it with new equipment.

The marine heat exchanger is in use. Due to improper operation of water treatment equipment. If the water quality control is not up to standard, the unqualified demineralized water is injected into the heating system, so that the calcium, magnesium and carbonate in the water will be decomposed into calcium carbonate and magnesium hydroxide precipitates on the heated surface of the heat exchanger. Formed hard scale.

Due to the poor thermal conductivity of scale, the heat exchange efficiency of the heat exchanger is reduced and the heat energy is seriously wasted. Thereby affecting the effect of heating, and causing a serious negative impact on the heating unit.

The marine heat exchanger was not cleaned in time, and the scale filtration in the water was incomplete, resulting in the water from the water outlet not being completely filtered, and directly supplied to the user. The general domestic hot water unit is basically used for bathing. Long-term contact with the skin without fully filtered water will produce bad results for the human body and affect the health of the person.

Decontamination and filters in the heating system also need to be cleaned from time to time. In addition, the inside of the pipe network should be kept clean. The main purpose is to prevent the blockage of marine heat exchangers.